Ford Bronco 6th Gen 2021-2026, ICON Stage 5 Billet Lift Kit, 3-4in Lift, Non-Sasquatch

A Bronco on larger tires and a 3-4in lift needs more than longer shocks. The stock arms bind at droop, the rear links limit articulation, and the dampers fade on long dirt roads.

The ICON Stage 5 system lifts four-door non-Sasquatch Broncos 3-4in at the front and 2-3in at the rear. It combines remote reservoir coilovers front and rear with billet aluminum upper control arms with Delta Joint Pro and billet rear lower links that adjust pinion angle on the vehicle.

Bolt it on with no cutting, set ride height and align. The Bronco rides taller and steadier.

Key Features

• Vehicle-specific remote reservoir coilovers front and rear for damping control under hard use
• Billet aluminum upper control arms with on-vehicle caster and camber adjustment and Delta Joint Pro
• Billet rear lower links with on-vehicle pinion angle adjustment
• Up to 11.5in of front and 14in of rear wheel travel with 35in tires; 100% bolt-on
• ICON triple-rate rear coil springs; high-strength alloy CNC machined lower bar pins

Specifications

• Front lift: 3-4in; rear lift: 2-3in (four-door non-Sasquatch models)
• Shock bodies: 2.5in front and rear; remote reservoirs
• Rear springs: progressive triple rate
• Shipping weight: 179 lb
• Shipping carton: 38 x 13 x 8 in

Fitment

• Ford Bronco 6th Gen 2021-2026 (non-Sasquatch models; does not fit Bronco Raptor)

In the Box

• Front and rear remote reservoir coilovers
• Billet upper control arms and rear lower links
• ICON coil springs and lower bar pins

Notes

• Lift heights are for four-door non-Sasquatch models.
• ICON high-clearance crash bars are recommended on non-Sasquatch models with 35in tires; with 37in tires, crash bar removal may be required but is not recommended.
• Does not fit Bronco Raptor.
• Shocks are fully serviceable. Lift heights are for a stock vehicle.
• Two-door models sit taller than four-door models.
• With 37in tires, ICON up-travel limiters are needed at the front and rear.
• Rear reservoir brackets may interfere with some aftermarket step or rock slider mounts; modifications may be required.
• Fitment was tested with ICON and OE steering components; because of tight clearance at the front coilovers, some aftermarket steering components may not be compatible.
• Triple-rate rear coils are optimized for a near-stock weight Bronco; their softer initial rates give lower than advertised ride heights as weight is added at the rear.

MPN K40005 · UPC 840103416137