Ford Bronco 6th Gen 2021-2026, ICON Stage 4 Lift Kit, Tubular, 3-4in Lift, Non-Sasquatch

A Bronco on larger tires and a 3-4in lift needs more than longer shocks. Stock arms bind at droop, alignment drifts, and the dampers fade on long dirt roads.

The ICON Stage 4 tubular system lifts four-door non-Sasquatch Broncos 3-4in at the front and 2-3in at the rear. It combines vehicle-specific remote reservoir coilovers front and rear with tubular upper control arms and Delta Joint Pro ball joints. Up to 11.5in of front and 14in of rear wheel travel is available with 35in tires.

Bolt it on with no drilling, cutting or welding, set ride height and align. The Bronco rides taller and stays in control.

Key Features

• Vehicle-specific remote reservoir front and rear coilovers for damping control under hard use
• Tubular upper control arms with the patented Delta Joint Pro ball joint (90 degrees of total articulation) for alignment correction
• 100% bolt-on; high-strength alloy CNC machined lower bar pins
• PTFE-lined spherical bearings, 6061 aluminum CNC machined components and CAD plated coilover bodies with 7/8in shafts
• ICON triple-rate rear coil springs

Specifications

• Front lift: 3-4in; rear lift: 2-3in (four-door non-Sasquatch models)
• Shock bodies: 2.5in front and rear
• Rear springs: progressive triple rate
• Reservoirs: remote; compression adjustment: none
• Shipping weight: 163 lb
• Shipping carton: 27 x 13 x 7 in

Fitment

• Ford Bronco 6th Gen 2021-2026 (non-Sasquatch models; does not fit Bronco Raptor)

In the Box

• Front and rear remote reservoir coilovers
• Tubular upper control arms with Delta Joint Pro
• ICON coil springs and lower bar pins

Notes

• Fits factory wheels and tires.
• Lift heights are for four-door non-Sasquatch models.
• ICON high-clearance crash bars are recommended on non-Sasquatch models with 35in tires; with 37in tires, crash bar removal may be required but is not recommended.
• When using the factory lower links, an ICON hose route kit is needed for the rear reservoir hoses.
• Does not fit Bronco Raptor.
• Shocks are fully serviceable. Lift heights are for a stock vehicle.
• Two-door models sit taller than four-door models.
• With 37in tires, ICON up-travel limiters are needed at the front and rear.
• Rear reservoir brackets may interfere with some aftermarket step or rock slider mounts; modifications may be required.
• Fitment was tested with ICON and OE steering components; because of tight clearance at the front coilovers, some aftermarket steering components may not be compatible.
• Triple-rate rear coils are optimized for a near-stock weight Bronco; their softer initial rates give lower than advertised ride heights as weight is added at the rear.

MPN K40004T · UPC 840103416120