Ford Bronco 6th Gen 2021-2026, ICON Stage 4 Billet Lift Kit, 2-3in Lift, Sasquatch

A Sasquatch Bronco already sits tall, yet the stock dampers and arms run out of travel on rocky ledges and washboard. Adding lift without fixing geometry only moves the problem.

The ICON Stage 4 system for Sasquatch Broncos pairs vehicle-specific remote reservoir coilovers front and rear with billet aluminum upper control arms and Delta Joint Pro ball joints. It lifts four-door models 2-3in at the front and 1.25-2.25in at the rear, and allows up to 11.5in of front and 14in of rear wheel travel with 35in tires.

Bolt it in with no drilling, cutting or welding, set ride height and dial in alignment. The Bronco covers more ground, with more composure.

Key Features

• Billet aluminum upper control arms with on-vehicle caster and camber adjustment
• Delta Joint Pro ball joints with 90 degrees of total articulation
• Vehicle-specific remote reservoir coilovers front and rear for damping control under hard use
• Up to 11.5in of front and 14in of rear wheel travel with 35in tires
• ICON triple-rate rear coil springs; high-strength alloy CNC machined lower bar pins
• PTFE-lined spherical bearings, 6061 aluminum CNC machined components, CAD plated coilover bodies with 7/8in shafts
• 100% bolt-on

Specifications

• Front lift: 2-3in; rear lift: 1.25-2.25in (four-door Sasquatch models)
• Shock bodies: 2.5in front and rear; remote reservoirs
• Rear springs: progressive triple rate
• Shipping weight: 161 lb
• Shipping carton: 38 x 13 x 8 in

Fitment

• Ford Bronco 6th Gen 2021-2026 (Sasquatch package models; does not fit Bronco Raptor)

In the Box

• Front and rear coilovers with remote reservoirs
• Billet upper control arms with Delta Joint Pro
• ICON coil springs and lower bar pins

Notes

• Lift heights are for four-door Sasquatch package models; Bronco Everglades have a front lift range of 1.5-2.5in.
• Does not fit Bronco Raptor.
• Shocks are fully serviceable. Lift heights are for a stock vehicle.
• Two-door models sit taller than four-door models.
• With 37in tires, ICON up-travel limiters are needed at the front and rear.
• Rear reservoir brackets may interfere with some aftermarket step or rock slider mounts; modifications may be required.
• Fitment was tested with ICON and OE steering components; because of tight clearance at the front coilovers, some aftermarket steering components may not be compatible.
• Triple-rate rear coils are optimized for a near-stock weight Bronco; their softer initial rates give lower than advertised ride heights as weight is added at the rear.

MPN K40014 · UPC 840103416236