Ford Bronco 6th Gen 2021-2026, ICON 2.5 Series Remote Reservoir CDEV Coilover Kit, Rear, 2-3in Lift

A Bronco changes character with every load and every road. Manual rear damping means stopping to adjust, and a fixed setting never fits both a packed truck and an empty one.

These ICON 2.5 Series rear coilovers have remote reservoirs and CDE valves that adjust compression in the vehicle and actively through ICON Intelligent Control (IIC), which reads G-forces and chassis movement. ICON triple-rate coil springs set rear height for 2-3in of lift on non-Sasquatch Broncos or 1.25-2.25in on Sasquatch Broncos.

Install the pair with the IIC kit and CDEV front coilovers, set your modes in the app and drive. The damping follows the terrain.

Key Features

• Increased wheel travel (up to 14in) and ride quality over stock
• CDE valve allows in-vehicle compression adjustment and active adjustment through ICON Intelligent Control (IIC)
• IIC uses onboard sensors to monitor G-forces and chassis movement and makes near-instant damping changes
• Remote reservoirs maintain cooler operating temperatures during extended off-road use
• Adjustable up to 2-3in of rear lift on non-Sasquatch Broncos, or 1.25-2.25in on Sasquatch Broncos
• Vehicle specific tuned for shock damping and control
• Unique ICON-engineered triple-rate coil springs
• FK rod end bearings; 6061 aluminum CNC machined components; CAD plated shock bodies with 7/8in shafts
• Fully rebuildable and re-tunable; 100% bolt-on with no drilling, cutting or welding

Specifications

• Rear lift: 2-3in on non-Sasquatch Broncos; 1.25-2.25in on Sasquatch Broncos (maximum ride height raise 3in)
• Body: 2.5in; shaft: 7/8in; cylinder: CAD plated steel
• Compressed length: 18.54in; extended length: 29.21in; travel: 10.67in
• Rear springs: progressive triple rate (167, 195 and 250 lb/in)
• Upper mount: mounting plate; lower mount: eyelet; includes bump stop
• Reservoir: remote; compression adjustment: electronic (CDEV)
• Shipping weight: 72 lb
• Shipping carton: 37 x 7 x 6 in

Fitment

• Ford Bronco 6th Gen 2021-2026 (does not fit Bronco Raptor)

Notes

• Fits factory wheels and tires.
• Does not fit Bronco Raptor.
• Lift height ranges are for four-door models; two-door models net about 0.5in of additional rear lift.
• With 37in tires, use ICON up-travel limiters at the rear.
• Triple-rate rear coils are optimized for a near-stock weight Bronco; their softer initial rates give lower than advertised ride heights as weight is added at the rear.
• Shocks are fully serviceable. Coilover heights are for a stock vehicle.
• Also requires the ICON IIC kit and CDEV front coilovers.
• An iOS device is required to run the ICON Intelligent Control app.
• Reservoir brackets may interfere with some aftermarket step or rock slider mounts; modifications may be required.

MPN 48710E · UPC 840103414133