Ford Bronco 6th Gen 2021-2026, ICON 2.5 Series Remote Reservoir CDEV Coilover Kit, Front, 3-4in Lift

Trail conditions on a Bronco change by the mile. Manual damping means stopping to make changes, and a fixed setting is a compromise on everything that follows.

These ICON 2.5 Series front coilovers have remote reservoirs and CDE valves that adjust compression in the vehicle and actively through ICON Intelligent Control (IIC). IIC uses onboard sensors to monitor G-forces and chassis movement and makes near-instant damping changes based on your settings. Ride height adjusts for 3-4in of lift on non-Sasquatch Broncos or 2-3in on Sasquatch Broncos.

Install the coilovers with the IIC kit and CDEV rear shocks, set your preferences in the app and drive. The damping keeps up with the terrain.

Key Features

• Increased wheel travel (up to 11.5in) and ride quality over stock
• CDE valve allows in-vehicle compression adjustment and active adjustment through ICON Intelligent Control (IIC)
• IIC uses onboard sensors to monitor G-forces and chassis movement and makes near-instant damping changes
• Remote reservoirs maintain cooler operating temperatures during extended off-road use
• Adjustable up to 3-4in of front lift on non-Sasquatch Broncos, or 2-3in on Sasquatch Broncos
• Vehicle specific tuned for shock damping and control
• ICON-engineered coil springs
• High-strength alloy CNC machined lower bar pin; FK rod end bearings
• 6061 aluminum CNC machined components; CAD plated shock bodies with 7/8in shafts; fully rebuildable and re-tunable
• 100% bolt-on, with no drilling, cutting or welding

Specifications

• Front lift: 3-4in on non-Sasquatch Broncos; 2-3in on Sasquatch Broncos (maximum ride height raise 4in)
• Body: 2.5in; shaft: 7/8in; cylinder: CAD plated steel
• Compressed length: 18.14in; extended length: 24.53in; travel: 6.39in
• Front spring rate: 500 lb/in, linear
• Upper mount: mounting plate; lower mount: bar pin; includes bump stop
• Reservoir: remote
• Compression adjustment: electronic (CDEV); minimum lift 2in
• Shipping weight: 52 lb
• Shipping carton: 27 x 13 x 7 in

Fitment

• Ford Bronco 6th Gen 2021-2026 (does not fit Bronco Raptor)

Notes

• Fits factory wheels and tires on Sasquatch package models only.
• Does not fit Bronco Raptor.
• Factory upper control arms do not align properly past 2.5in of lift; an aftermarket upper control arm is recommended above that.
• ICON Delta Joint Pro upper control arms are recommended with this much wheel travel and lift; other aftermarket front upper control arms may not be compatible, and the installer should cycle the suspension and check for ball joint bind.
• Bronco Everglades have a lift range of 1.5-2.5in.
• With 37in tires, use ICON up-travel limiters at the front.
• ICON high-clearance crash bars are recommended on non-Sasquatch models with 35in tires; with 37in tires, crash bar removal may be required but is not recommended.
• Fitment was tested with ICON and OE steering components; because of tight clearance at the front coilovers, some aftermarket steering components may not be compatible.
• Shocks are fully serviceable. Coilover heights are for a stock vehicle.
• Also requires the ICON IIC kit and CDEV rear shocks.
• An iOS device is required to run the ICON Intelligent Control app.

MPN 48700E · UPC 840103412382