Ford Bronco 6th Gen 2021-2026, ICON 2.5 Series Remote Reservoir CDCV Coilover Kit, Front, 3-4in Lift

A lifted Bronco goes from highway to rock garden in an afternoon. A fixed compression setting that feels right on pavement is too soft on the ledges, and stopping to swap parts is not an option.

These ICON 2.5 Series front coilovers have remote reservoirs for cooler operation and CDCV valves that offer 10 settings of external compression damping adjustment. Ride height adjusts for 3-4in of lift on non-Sasquatch Broncos or 2-3in on Sasquatch Broncos, and ICON coil springs and a lower bar pin are included.

Install the pair, set the height and turn the dial to suit the terrain. The front end rides the way the trail needs.

Key Features

• Increased wheel travel (up to 11.5in) and ride quality over stock
• CDCV valves give 10 settings of external compression damping adjustment
• Remote reservoirs maintain cooler operating temperatures during extended off-road use
• Adjustable up to 3-4in of front lift on non-Sasquatch Broncos, or 2-3in on Sasquatch Broncos
• Vehicle specific tuned for shock damping and control
• ICON-engineered coil springs
• High-strength alloy CNC machined lower bar pin; FK rod end bearings
• 6061 aluminum CNC machined components; CAD plated shock bodies with 7/8in shafts; fully rebuildable and re-tunable
• 100% bolt-on, with no drilling, cutting or welding

Specifications

• Front lift: 3-4in on non-Sasquatch Broncos; 2-3in on Sasquatch Broncos (maximum ride height raise 4in)
• Body: 2.5in; shaft: 7/8in; cylinder: CAD plated steel
• Compressed length: 18.14in; extended length: 24.53in; travel: 6.39in
• Front spring rate: 500 lb/in, linear
• Upper mount: mounting plate; lower mount: bar pin; includes bump stop
• Reservoir: remote
• Compression adjustment: CDCV, 10 settings, manual
• Shipping weight: 65 lb
• Shipping carton: 31 x 13 x 7 in

Fitment

• Ford Bronco 6th Gen 2021-2026 (does not fit Bronco Raptor)

Notes

• Fits factory wheels and tires on Sasquatch package models only.
• Does not fit Bronco Raptor.
• Factory upper control arms do not align properly past 2.5in of lift; an aftermarket upper control arm is recommended above that.
• ICON Delta Joint Pro upper control arms are recommended with this much wheel travel and lift; other aftermarket front upper control arms may not be compatible, and the installer should cycle the suspension and check for ball joint bind.
• Bronco Everglades have a lift range of 1.5-2.5in.
• With 37in tires, use ICON up-travel limiters at the front.
• ICON high-clearance crash bars are recommended on non-Sasquatch models with 35in tires; with 37in tires, crash bar removal may be required but is not recommended.
• Fitment was tested with ICON and OE steering components; because of tight clearance at the front coilovers, some aftermarket steering components may not be compatible.
• Shocks are fully serviceable. Coilover heights are for a stock vehicle.

MPN 48700C · UPC 840103412375