Ford Bronco 6th Gen 2021-2026, ICON 2.5 Series Internal Reservoir Coilover Kit, Rear, 2-3in Lift

The back of a Bronco takes the weight of the trip, from fuel and water to a spare and a drawer system. Stock rear shocks bounce under that load, and a front lift without a rear one leaves the truck nose-high.

These ICON 2.5 Series rear coilovers have 2.5in internal reservoir shocks tuned for the Bronco and ICON triple-rate coil springs that stay soft over small bumps and resist bottoming. Rear ride height adjusts for 2-3in of lift on non-Sasquatch Broncos or 1.25-2.25in on Sasquatch Broncos, with up to 14in of wheel travel.

Install the pair, set the height and drive. The rear carries the load and keeps the stance level.

Key Features

• Increased wheel travel (up to 14in) and ride quality over stock
• Adjustable up to 2-3in of rear lift on non-Sasquatch Broncos, or 1.25-2.25in on Sasquatch Broncos
• Vehicle specific tuned for shock damping and control
• Unique ICON-engineered triple-rate coil springs
• FK rod end bearings; 6061 aluminum CNC machined components; CAD plated shock bodies with 7/8in shafts
• Fully rebuildable and re-tunable; 100% bolt-on with no drilling, cutting or welding

Specifications

• Rear lift: 2-3in on non-Sasquatch Broncos; 1.25-2.25in on Sasquatch Broncos (maximum ride height raise 3in)
• Body: 2.5in; shaft: 7/8in; cylinder: CAD plated steel
• Compressed length: 19.24in; extended length: 29.31in; travel: 10.07in
• Rear springs: progressive triple rate (167, 195 and 250 lb/in)
• Upper mount: mounting plate; lower mount: eyelet; includes bump stop
• Reservoir: internal; compression adjustment: none
• Shipping weight: 65 lb
• Shipping carton: 37 x 7 x 6 in

Fitment

• Ford Bronco 6th Gen 2021-2026 (does not fit Bronco Raptor)

Notes

• Fits factory wheels and tires.
• Does not fit Bronco Raptor.
• Lift height ranges are for four-door models; two-door models net about 0.5in of additional rear lift.
• With 37in tires, use ICON up-travel limiters at the rear.
• Triple-rate rear coils are optimized for a near-stock weight Bronco; their softer initial rates give lower than advertised ride heights as weight is added at the rear.
• Shocks are fully serviceable. Coilover heights are for a stock vehicle.

MPN 48610 · UPC 840103412399