Ford Bronco 6th Gen 2021-2026, ICON 2.5 Series Internal Reservoir Coilover Kit, Front, 3-4in Lift

A Bronco on bigger tires needs a front end that lifts without giving up travel. The stock coilovers run out of stroke on rock and ruts, and the ride stiffens on rough pavement.

These ICON 2.5 Series front coilovers are tuned for the Bronco, with 2.5in bodies that have a larger piston area for better damping across different terrain. ICON coil springs and a lower bar pin come with the kit, and the ride height adjusts for 3-4in of lift on non-Sasquatch Broncos or 2-3in on Sasquatch Broncos.

Bolt in the pair, set the height and check alignment. The front end gains travel and rides smoother.

Key Features

• Increased wheel travel (up to 11.5in) and ride quality over stock
• Adjustable up to 3-4in of front lift on non-Sasquatch Broncos, or 2-3in on Sasquatch Broncos
• 2.5in shock bodies with an internal reservoir and increased piston area
• Vehicle specific tuned for shock damping and control
• ICON-engineered coil springs
• High-strength alloy CNC machined lower bar pin; FK rod end bearings
• 6061 aluminum CNC machined components; CAD plated shock bodies with 7/8in shafts; fully rebuildable and re-tunable
• 100% bolt-on, with no drilling, cutting or welding

Specifications

• Front lift: 3-4in on non-Sasquatch Broncos; 2-3in on Sasquatch Broncos (maximum ride height raise 4in)
• Body: 2.5in; shaft: 7/8in; cylinder: CAD plated steel
• Compressed length: 18.14in; extended length: 24.53in; travel: 6.39in
• Front spring rate: 500 lb/in, linear
• Upper mount: mounting plate; lower mount: bar pin; includes bump stop
• Reservoir: internal
• Compression adjustment: none
• Shipping weight: 55 lb
• Shipping carton: 31 x 13 x 7 in

Fitment

• Ford Bronco 6th Gen 2021-2026 (does not fit Bronco Raptor)

Notes

• Fits factory wheels and tires on Sasquatch package models only.
• Does not fit Bronco Raptor.
• Factory upper control arms do not align properly past 2.5in of lift; an aftermarket upper control arm is recommended above that.
• ICON Delta Joint Pro upper control arms are recommended with this much wheel travel and lift; other aftermarket front upper control arms may not be compatible, and the installer should cycle the suspension and check for ball joint bind.
• Bronco Everglades have a lift range of 1.5-2.5in.
• With 37in tires, use ICON up-travel limiters at the front.
• ICON high-clearance crash bars are recommended on non-Sasquatch models with 35in tires; with 37in tires, crash bar removal may be required but is not recommended.
• Fitment was tested with ICON and OE steering components; because of tight clearance at the front coilovers, some aftermarket steering components may not be compatible.
• Shocks are fully serviceable. Coilover heights are for a stock vehicle.

MPN 48600 · UPC 840103412351