Ford Bronco 4-Door 6th Gen 2021-2022, Zone Offroad 3.5in Adventure Series Lift Kit, Badlands, Non-Sasquatch

A four-door Badlands carries the family and the gear, and stock tire clearance is what holds it back on rougher routes. The Zone Offroad 3.5 in Adventure Series kit is made for Badlands models without the Sasquatch package. It lifts the front 3.5 inches and the rear 2.5 inches with 2-piece strut spacers and Adventure Pro Series upper control arms, building on the factory suspension geometry so ride quality and handling carry over. The kit adds clearance for 35 to 37 inch tires and the hardware is included. Set aside a few hours to install it, then load up and go.

Key Features

• Maintains ride and handling while improving off-road capability
• 2-piece strut spacer design maintains ride quality without overextending suspension during down travel
• Adventure Pro Series upper control arms for strength, travel and maintenance-free operation
• Lifts and levels the stance with clearance for oversized wheels and tires
• Made in the USA

Specifications

• Front lift: 3.5 in, by strut spacers
• Rear lift: 2.5 in
• Maximum tire size: 37 x 12.5 in
• Back spacing: 5-5.5 in
• Installation time: 3-4 hours
• Installation difficulty: 3 out of 5
• Metal cutting: not required
• Welding: not required
• Required tools: basic hand tools
• Shipping weight: 36.85 lb
• Shipping carton: 48 x 40 x 24 in

Fitment

• Ford Bronco 4-Door 6th Gen 2021-2022 (Badlands without the Sasquatch package only)

Does not fit Bronco Sport models.

In the Box

• 2-piece strut spacers
• Adventure Pro Series upper control arms
• Hardware to complete the installation

Warranty

Includes the Factory Protection Plus warranty program.

Notes

• For Badlands models without the Sasquatch package only.
• Tire fitment: a 37 x 12.50 tire works at ride height but contacts the front body mount and possibly the rear inner fender through wheel travel and full steering lock; those areas must be addressed if running that size with full suspension travel.
• The CV axle nut may need to be loosened and tightened on the ground with the weight of the vehicle.

MPN ZONF100 · UPC 810156364822