Bulldog Winch 8,000 lb Winch with 100 ft Wire Rope, 5.2 HP Series Wound Motor

An 8,000 lb recovery needs a winch with the power and the rope length to match. Water in the contactor or a short controller lead can stop a pull cold.

This Bulldog Winch 8,000 lb winch has a 5.2 HP 12v DC series wound motor and a 3-stage planetary gear train at 235:1. The 450A contactor is sealed against the weather, the power unit is multi-mount and remote mountable, and the battery leads have high heat and abrasion-resistant sheathing. It comes with 100 ft of wire rope and a fairlead, plus a wired hand control on a 20 ft lead.

Mount it on the 10 x 4.5 in pattern, place the power unit and plug in the controller.

Key Features

• 5.2 HP 12v DC series wound motor
• 450A sealed contactor for weather and water protection
• Power unit is multi-mount and remote mountable
• Gearbox clockable to rotate the shifter
• Battery leads with high heat and abrasion-resistant sheathing
• Freespooling clutch
• Automatic load-holding brake in the drum
• Corded hand control with 20 ft lead; wireless remote optional
• Fairlead included

Specifications

• Pull capacity: 8,000 lb
• Motor: 5.2 HP 12v DC series wound
• Contactor: 450A sealed
• Gear train: 3-stage planetary
• Gear ratio: 235:1
• Wire rope: 100 ft (8 mm)
• Drum: 2.5 x 8.8 in (63.5 x 223.5 mm)
• Battery leads: 6 ft
• Mounting bolt pattern: 10 x 4.5 in
• Overall dimensions: 21.7 x 6.3 x 8.6 in (551 x 160 x 218 mm)
• Recommended battery: 650 CCA
• Series: Standard
• Shipping weight: 79.8 lb
• Shipping carton: 24 x 14 x 10.5 in

Warranty

2 year limited.

MPN 10041 · UPC 878850005861