{"product_id":"ford-bronco-6th-gen-icon-2-5-series-remote-reservoir-cdev-coilover-kit-front-3-4in-lift","title":"Ford Bronco 6th Gen 2021-2026, ICON 2.5 Series Remote Reservoir CDEV Coilover Kit, Front, 3-4in Lift","description":"\u003cp\u003eTrail conditions on a Bronco change by the mile. Manual damping means stopping to make changes, and a fixed setting is a compromise on everything that follows.\u003c\/p\u003e\n\u003cp\u003eThese ICON 2.5 Series front coilovers have remote reservoirs and CDE valves that adjust compression in the vehicle and actively through ICON Intelligent Control (IIC). IIC uses onboard sensors to monitor G-forces and chassis movement and makes near-instant damping changes based on your settings. Ride height adjusts for 3-4in of lift on non-Sasquatch Broncos or 2-3in on Sasquatch Broncos.\u003c\/p\u003e\n\u003cp\u003eInstall the coilovers with the IIC kit and CDEV rear shocks, set your preferences in the app and drive. The damping keeps up with the terrain.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased wheel travel (up to 11.5in) and ride quality over stock\u003c\/li\u003e\n\u003cli\u003eCDE valve allows in-vehicle compression adjustment and active adjustment through ICON Intelligent Control (IIC)\u003c\/li\u003e\n\u003cli\u003eIIC uses onboard sensors to monitor G-forces and chassis movement and makes near-instant damping changes\u003c\/li\u003e\n\u003cli\u003eRemote reservoirs maintain cooler operating temperatures during extended off-road use\u003c\/li\u003e\n\u003cli\u003eAdjustable up to 3-4in of front lift on non-Sasquatch Broncos, or 2-3in on Sasquatch Broncos\u003c\/li\u003e\n\u003cli\u003eVehicle specific tuned for shock damping and control\u003c\/li\u003e\n\u003cli\u003eICON-engineered coil springs\u003c\/li\u003e\n\u003cli\u003eHigh-strength alloy CNC machined lower bar pin; FK rod end bearings\u003c\/li\u003e\n\u003cli\u003e6061 aluminum CNC machined components; CAD plated shock bodies with 7\/8in shafts; fully rebuildable and re-tunable\u003c\/li\u003e\n\u003cli\u003e100% bolt-on, with no drilling, cutting or welding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFront lift: 3-4in on non-Sasquatch Broncos; 2-3in on Sasquatch Broncos (maximum ride height raise 4in)\u003c\/li\u003e\n\u003cli\u003eBody: 2.5in; shaft: 7\/8in; cylinder: CAD plated steel\u003c\/li\u003e\n\u003cli\u003eCompressed length: 18.14in; extended length: 24.53in; travel: 6.39in\u003c\/li\u003e\n\u003cli\u003eFront spring rate: 500 lb\/in, linear\u003c\/li\u003e\n\u003cli\u003eUpper mount: mounting plate; lower mount: bar pin; includes bump stop\u003c\/li\u003e\n\u003cli\u003eReservoir: remote\u003c\/li\u003e\n\u003cli\u003eCompression adjustment: electronic (CDEV); minimum lift 2in\u003c\/li\u003e\n\u003cli\u003eShipping weight: 52 lb\u003c\/li\u003e\n\u003cli\u003eShipping carton: 27 x 13 x 7 in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003cul\u003e\u003cli\u003eFord Bronco 6th Gen 2021-2026 (does not fit Bronco Raptor)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eNotes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFits factory wheels and tires on Sasquatch package models only.\u003c\/li\u003e\n\u003cli\u003eDoes not fit Bronco Raptor.\u003c\/li\u003e\n\u003cli\u003eFactory upper control arms do not align properly past 2.5in of lift; an aftermarket upper control arm is recommended above that.\u003c\/li\u003e\n\u003cli\u003eICON Delta Joint Pro upper control arms are recommended with this much wheel travel and lift; other aftermarket front upper control arms may not be compatible, and the installer should cycle the suspension and check for ball joint bind.\u003c\/li\u003e\n\u003cli\u003eBronco Everglades have a lift range of 1.5-2.5in.\u003c\/li\u003e\n\u003cli\u003eWith 37in tires, use ICON up-travel limiters at the front.\u003c\/li\u003e\n\u003cli\u003eICON high-clearance crash bars are recommended on non-Sasquatch models with 35in tires; with 37in tires, crash bar removal may be required but is not recommended.\u003c\/li\u003e\n\u003cli\u003eFitment was tested with ICON and OE steering components; because of tight clearance at the front coilovers, some aftermarket steering components may not be compatible.\u003c\/li\u003e\n\u003cli\u003eShocks are fully serviceable. Coilover heights are for a stock vehicle.\u003c\/li\u003e\n\u003cli\u003eAlso requires the ICON IIC kit and CDEV rear shocks.\u003c\/li\u003e\n\u003cli\u003eAn iOS device is required to run the ICON Intelligent Control app.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003eMPN 48700E · UPC 840103412382\u003c\/p\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":48648589771063,"sku":"48700E","price":2892.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/2808\/8631\/files\/ivd48700e_1.jpg?v=1713020833","url":"https:\/\/trailrecon.com\/products\/ford-bronco-6th-gen-icon-2-5-series-remote-reservoir-cdev-coilover-kit-front-3-4in-lift","provider":"TrailRecon","version":"1.0","type":"link"}