A: Yes. Fits 2020-2023 Gladiator with 3.6l engine only.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Eric (1/3/2023)
Q:Where did you mount the compressor on your Wrangler Diesel?
Asked by: frank
- 12/8/2022
A: An under seat mount is required for the diesel models. Grimm Offroad P/N GOR10163 is what we would recommend.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Eric (12/12/2022)
Q:Does this also fit the 2023 JLU?
Asked by: Tarkus
- 11/29/2022
A: Yes. Fits 2018-2023 Jeep Wrangler JL. Fits 3.6L and 2.0L gas engines only. Not Compatible with 4xe, 392, EcoDiesel, and 3.6L if equipped eTorque.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Eric (11/29/2022)
Q:Hi Brad
Just curious if this will work on a non etorque 2.0L turbo JL, and can you wire an ARB compressor into the Jeep aux switches instead of the Grimm switch
Thanks Colin
Asked by: Colin Smith
- 10/21/2022
A: This will fit non-eTorque 2.0L. You can trigger the compressor from the Jeep aux switch but it will take some rewiring of the ARB harness.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Eric (10/31/2022)
Q:Is there a kit for a 2023 392 XR?
Asked by: Kip
- 8/28/2022
A: Not at this time.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Eric (9/13/2022)
Q:This mounting kit fits right handle JLU?
Asked by: Kei Tanaka
- 6/3/2022
A: This kit is not compatible with RHD models.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Eric (6/3/2022)
Q:Will this kit fit a 2022 JL Unlimited Rubicon? Thanks.
Asked by: Mike
- 5/4/2022
A: Fits 2018-2022 Jeep Wrangler JL/JLU with 3.6L or 2.0L gas engines only. Does not fit diesel, 4xe, or 392 models.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Eric (5/4/2022)
Q:Hello, Does this bracket work on a Jeep rubicon gladiator 2022
Asked by: Scott Sloate
- 2/4/2022
A: Fits 2020-2022 Jeep Gladiator JT all trim levels. Does not fit diesel.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Eric (2/10/2022)
Q:Will this fit a 2021 Jeep JL Wrangler 392?
Asked by: Jeremy Pettis
- 2/4/2022
A: Fits 3.6L and 2.0L gas engines only. Does not fit diesel, 4xe, or 392 models.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Eric (2/10/2022)
Q:Is this kit compatible with the single CKMA12 On-Board 12V Air Compressor System ?
Asked by: gregory lasserre
- 12/2/2021
A: This kit is only compatible with the ARB twin compressor.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Eric (12/3/2021)
Q:Would this fit on a right hand drive ? Need one for here in Australia :)
Asked by: V
- 11/3/2021
A: This bracket kit is not compatible with right hand drive models.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Eric (11/4/2021)
Q:Grimm Offroad ARB Twin Compressor Mounting Bracket Kit - JT/JL
Part Number: GOR10013
Will this work on a 2021 Rubicon 392 JL?
Asked by: Billy Guerrero
- 10/2/2021
A: Fits 3.6L and 2.0L gas engines only. Does not fit diesel, 4xe, or 392 models.
Was this answer helpful?
2 of 2 Customer(s) found this Answer helpful.
Answer provided by: Eric (10/4/2021)
Q:Is it safe to assume this will fit a 2021 Rubicon?
Asked by: John Ward
- 9/11/2021
A: This will work on your 2021 Rubicon as long as it is the 3.6L or 2.0L gas engine.
Was this answer helpful?
1 of 1 Customer(s) found this Answer helpful.