Icon Vehicle Dynamics Front 2.5 VS IR Coilover Kit - 2021+ Bronco

ICON Vehicle Dynamics V.S. 2.5 Series internal reservoir front coilover shocks are an incredible upgrade for the front end of the 2021-UP Ford Bronco. These adjustable coilovers allow up to 3-4in of lift height adjustability on Broncos without the Sasquatch package or 2-3in of lift over stock Sasquatch equipped Broncos, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific shock length and valving along with the larger 2.5in shock body and increased piston area over stock components yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road. When paired with ICON 2.5 Series rear coilovers vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Ford Bronco.

Features:

• Increased wheel travel (up to 11.5in) and ride quality over stock
• Vehicle specific tuned for superior shock damping and control
• Adjustable up to 3-4in of front lift height on non-Sasquatch or 2-3in of front lift on Sasquatch Broncos
• ICON engineered coil springs
• 6061 Aircraft grade aluminum CNC machined components
• Corrosion resistant CAD plated shock bodies with 7/8in diameter shafts
• FK rod end bearings for extended longevity and minimal deflection
• High strength alloy CNC machined lower bar pin
• Fully rebuildable and re-tunable
• 100% Bolt-on - no drilling, cutting or welding necessary for installation

Fitment Notes:

• OEM Wheels & Tires Fitment: Yes
• Recommended Aftermarket Wheels (With Sasquatch Package): ICON Alloys | 17x8.5in w/ 4.75in Backspace / 0mm Offset
• Recommended Aftermarket Wheels (With Sasquatch Package): ICON Alloys | 18x9in w/ 5.00in Backspace / 0mm Offset
• Recommended Aftermarket Wheels (With Sasquatch Package): ICON Alloys | 20x9in w/ 5.00in Backspace / 0mm Offset
• Recommended Aftermarket Wheels (Without Sasquatch Package): ICON Alloys | 17x8.5in w/ 5.75in Backspace / 25mm Offset
• Recommended Aftermarket Tires (With Sasquatch Package): 35in x 12.50in (37in tires require coilover bump stop spacers along with minor trimming)
• Recommended Aftermarket Tires (Without Sasquatch Package): 35in x 12.50in (Recommend high clearance crash bars part number 42000, 37in tires require coilover bump stop spacers along with trimming and modifications)
• Due to increased wheel travel and lift height provided by these coilovers, ICON upper control arms with Delta Joint Pro, part numbers 48400DJ or 48500DJ, are recommended. Other aftermarket front upper control arms may not be compatible and it is the duty of the installer to verify fitment. Failure to cycle suspension and check for ball joint bind issues may lead to component failure and/or injury.
• Fitment testing done with ICON & OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.
• Bronco Everglades will have lift height range of 1.5-2.5in over stock
• Not compatible with Bronco Raptor