Grimm OffRoad’s A-pillar light brackets allow mounting of auxiliary lights to the lower A-pillar/cowl location of your Jeep Wrangler JK. The low-profile light brackets mount using stock bolt locations and require no modifications for installation. They retain the auxiliary light’s mounting hardware allowing aiming of the lights in both the vertical and horizontal axes.
TM5 LED Lights
The TM5 is the definition of VERSATILITY. This light is the solution to your driving (offroad) lifestyle. The all-inclusive light is all you will need for the ever changing off-roader. From setting up camp, or slow speed rugged terrain driving, the area light will produce 180 degrees of purposeful lighting bringing comfort to your eyes and eliminates unnecessary light down range. As you boogie out of camp or out of the slow rocky stuff, you can flip the switch into the TM5's low beam mode. The low beam is a combination of a traditional drive and spot beam.
The low beam takes over where your factory high beams stop. When you’re looking for more but do not want to blind the next state over, this is the ideal setting. The 3rd and final output option is for those "Go Getters". 90 Watts and spots. What else is there? Bugs splatter on windows at these speeds. Sharing the same optics as the low beam you will still get the light spread needed, you will just have more horsepower behind those LEDs. So, both hands on the wheel and look ahead.
Note: This light requires NO tools to switch between optics or changing lenses in the field that may cause a leak path or frustration
NACHO’s wire harness is designed with purpose, application, and quality again the driving factors of design. This wire harness is the solution to making sure your lights are properly powered. The harness utilizes 2 Carling Brand switches, TXL grade wire sheathed for High Current use. A watertight 40 amp fuse block with 2 High Power Automotive Relays. This harness is set up for pairs but can be tied into and power 4 of our lights without risking quality or performance. The length of this harness was designed for mounting lights on A Pillars, or front bumper. Don’t risk your vehicle or light performance with some cheap wiring. Get what is needed, and this harness is the answer.
(1) A-Pillar Light Mount
(2) TM512 5.75in LED Lights
(1) TM5 wire harness