Store your tools and other equipment that measures up to 15 in diameter with the End of the Road Quick Fist XL Clamps
. A single 14 in strap has a safe working load of 150 lbs and a breaking strength of 300 lbs. However, with two clamp supports you can double those numbers and now have a 300 lb safe working load and 600 lb breaking strength. The XL clamp holds your essential items that measure up to 28 inches in linear length.
- Each half of the clamp mounts with four #10 screws or bolts
- Mounting Area: 2” x 2”
Note: Two ways to install the Quick Fist Clamps are with Jacknuts or Rivetnuts:
- Jacknuts are a fast and inexpensive way to put a nut into a place where there is no access for a traditional nut. After drilling a hole, the Jacknut is inserted and then tightened with the proper sized bolt. The “legs” of the Jacknut collapse to grip the inside of the mounting surface, leaving a permanent, reusable nut in the hole.
- Rivetnuts (best known brand is Nutserts) These are nuts that can be riveted into drilled holes. Like Jacknuts these are particularly good to install where the underside of a mounting hole cannot be accessed. To install rivetnuts, you will need a special type of rivet gun or find a garage that will install them for you.