Do not use this kit if you are using the factory hub/tone
ring kit from the 2005+ SuperDuty Axle. This kit if for those wanting to keep
the 52 tooth tone ring count that comes factory on the Jeep JK or when using
aftermarket front axle hubs with the same tooth count
Use of this kit may require an optional tuner which has
access to adjusting Gear Ratio and Tire size. Your actual programmer settings
may differ from the axle ratio and tire size on your vehicle depending on tone
ring tooth count used. If using the 60 tooth option, speedometer may be off 1 -
- Laser Cut for precision reading from ABS Sensor. Machining
of Hub and pressing on over machined surface is necessary.
- Zinc plated for corrosion resistance and improved sensor
These mounts are used with JK Factory ABS Sensors. The 2005+ SuperDuty Dana 60 front utilizes a
60 Tooth tone ring and this kit is designed to work with a matching SuperDuty
Axle set, so this kit is not designed to be used with this axle.
If using a front axle without tone rings a second BB1054 can
be used to add a second ABS Sensor to each wheel and then splice into the front